About Us | E-cagalog | Support | News | Contact Us
Views: 25 Author: Site Editor Publish Time: 2026-11-19 Origin: Site
The mirror in your hotel mock-up room looks good. Then the installer points out that the cable comes out on the wrong side. In the next room, the same mirror is too wide for the wall between the vanity and the shower screen. These are small problems when you’re looking at one room. Across an entire floor, they can mean extra work for several trades.
A good specification starts with the room. Before asking factories to quote, give them enough information to see where the mirror goes, how guests will use it, and what the installation team will need.
Hotels often have several bathroom layouts, even when the finishes look identical. Make a simple schedule with the room type, mirror width and height, orientation, and quantity. List accessible rooms and suites separately if they use different layouts. For a renovation, check a few actual rooms against the drawings. A vanity that looks centered on paper may sit closer to a side wall once the finishes are in place.
Send the supplier a bathroom elevation showing the vanity, faucet, and anything close to the mirror, such as a wall light or shelf. Mark the available wall space and the existing cable position if you’re reusing the wiring. Ask for a drawing that shows the mirror from the back as well as the front. The mounting points and cable exit are much easier to verify on a drawing than on a product photo.
A backlit mirror can look great in a room photo. Stand in front of it with the rest of the bathroom lights on, though, and see how well you can actually see your face. If the ceiling light leaves shadows under your eyes or chin, a front-lit mirror may work better at that vanity. If the room already has good light at face level, backlighting may be all you want from the mirror.
Review color temperature alongside the fixtures you’ve already chosen. A 3000K mirror gives a warm appearance, while 4500K looks more neutral. Look at both against the actual countertop and wall finish if you can. Agree on a fixed color temperature or ask how a three-color model behaves when guests switch it off and back on. If the room uses a wall switch or a key-card power system, include that setup in the sample test.
A defogger can be useful in bathrooms where guests often use the mirror right after showering. On the sample, check how much of the glass clears and whether the defogger has its own control. Pad size and position matter, especially if you’re ordering a wide mirror for a double vanity.
Try the controls as if you’ve just walked into the room for the first time. Can you find the touch button when the lights are off? If you’ve chosen a hand sensor, is there enough space to use it without reaching around the faucet? Ask housekeeping to try wiping the mirror as well. A touch control that is easy to use with a dry hand may behave differently during cleaning.
Ask for the overall depth, mirror weight, mounting hardware details, and electrical connection drawing. Check whether the mirror can be removed for servicing without taking apart the vanity or disturbing the surrounding finishes. If a driver or control fails after opening, the maintenance team will want to know whether it can replace the part and how to order it.
Have the project’s electrical team confirm the requirements for the intended location and destination market. Share those requirements with the supplier and ask which test reports or certificates cover the exact model and configuration quoted. Record the approved glass thickness, safety backing, frame finish, and packaging in the same specification so purchasing and quality control are working from the same details.
When possible, install a production-spec sample in a mock-up room. Have the installer check the brackets and cable position, the design team review the light and finish, and the hotel team try the controls. Put any changes on the drawing and confirm the revision with the supplier before releasing the bulk order.
Agree on carton labels by room type or mirror size, especially if several models will arrive together. Include spare mirrors or parts in the quote if the hotel needs them. Ask the supplier for a production schedule based on your installation sequence so you know which room types will be ready first.
If you’re sourcing LED bathroom mirrors for a hotel project, send Spremium your room schedule, bathroom elevations, estimated quantities, and target installation date. We can review the layouts with you and identify which details to confirm before sampling.